Back to Training Register

COMPETENCY TEST
REGISTER NO 43485
ADHOC TRAINING MODULE NAME
EMPLOYEE 022 - DYLAN PILLAY
COMPETENCY DATE
MAX SCORE
PASS MARK   50 %
ACTUAL SCORE   ACTUAL SCORE (%)  
COMPETENCY RATING
I = The trainee still needs supervision while performing the operation. Operator cannot meet the cycle time or reject requirements
L = The operator can perform without supervision. Operator consistantly meets the cycle time or reject requirements
U = operator is fully competant and can now train others on the operation.
ATTENDANCE DETAILS
ActivityCommentsRatingActions
2.Request wire -Requesting wire from stores he was able to get route card and gives store so he could be issued with wire and check if it is the right wire size. 2 Edit Delete
3.Straighten the wire. -Operator was able to straighten the wire using the torque reach to set the feed rollers and use the quick release on the side to straighten wire on his own. 2 Edit Delete
4. Load the TOYO/0064 programme. -He was able to find programme and load. 2 Edit Delete
5. Form part to c/f. - He was able to form part to fit c/f and made the right adjustments needed to form part but needs more time. 1 Edit Delete
6. Log on system and BIS CARD. - He made a 1st off and was able to log on system and open up a BIS CARD. 2 Edit Delete
1. Safety. - Operator had the right PPE on and worn his gloves and earplugs. 2 Edit Delete
 
 
APPROVED BY OPERATOR
APPROVED BY TRAINER